How to Setup a Procolored DTF Printer Successfully?
If you want to setup procolored DTF printer, then these are the steps you need to follow.
. Begin by opening the ink compartment and removing the ink waste container and mounting holder from the machine.
. Then move to the back of the printer and remove the two screws from near the power socket.
. Now, you need to align the printer holes with the ink waste holder holes and screw the holder to the printer with the help of the same screws.
. After that, put the ink waste container in the holder and zip-tie it with the help of a tube.
. Then, power on the printer after plugging its cable.
. Press the power button, and it starts to flash green light.
. Open the ink compartment and look for the black ink waste line, remove the twist tie, and unstable it.
. Then, pour the ink as suggested on the labels.
. Next, insert the orange tab into the syringe and open the printer cover to access the print head and tubes.
. Then, remove the ink cartridge and insert the ink with the help of the syringe.
. After that, rinse the syringe with water.
. Repeat the step 10 for all the cartridges.
. Close the printer and insert the syringe into the ink waistline tube; you need to pull it until the black ink comes out.
. Attach the tube to the ink waste container and squirt the extra ink from the syringe.
. Next, you need to clip on the rollers rack to your procolored DFT printer.
. Once the roller rack attaching process is complete, press the button on the side to feed the paper.
. Now, plug the USB into the printer and the other end of the printer.
. Then, you need to locate the USB flash driver with an instructional video and a blue flash drive.
. Now, copy the files from that drive to your computer.
. In addition, install the software on your device.
. Move to the Software Driver folder and choose the software that says PRO RIP.
. Once the Microsoft Visual C++ window shows up on the screen, select Repair. Done
Source:- Setup Procolored DTF Printer
Comments
Post a Comment