How to Calibrate Cricut Maker 3​

Is your Cricut Maker 3 machine not giving the perfect cut? In this case, you can perform your device calibration to help you out. If you do not know the process of calibrating your Maker 3 machine, then here is a complete guide to help you with the process.

Follow these step-by-step instructions to easily calibrate your Cricut Maker 3 machine to get flawless cuts with your machine.

. In Cricut Design Space, click on the Profile menu and select Calibration.

. Then, choose Print Then Cut; choose your printer and click on Print to print a test sheet.

. Now, insert the test sheet on a blue light grip mat and press the up and down arrow buttons to load.

. Push the start button; Cricut will then scan the printout for calibration marking and will start cutting.

. When the cut is complete, check the cut and see if it touches the printed line without unloading the mat.

. Now, move to your computer, select Yes in the Design Space, and click Continue.

. Next, your machine will begin the calibration cut along the top and side of the page.

. Henceforth, you should determine which number and letter cuts are closest to the center of the printed lines without uploading the mat.

. Furthermore, head to Design Space, click the Top and Right drop-down boxes, and choose the corresponding number and letter.

. Next, choose the Continue option.

. Now, your device will then make a confirmation cut along the large rectangle; if you‘re satisfied with the cut, select Yes and choose Continue.

Source:- Calibrate Cricut Maker 3​