Manny Maker Services

Do you want to learn how to use the Cricut Easy Press machine? Here, learn about simple step-by-step methods to do that easily.

Setup Process

Initially, you need to plug the heat press machine into a power outlet.
After that, turn on the machine by pressing the power button.
Now, It may take approximately one to two minutes to reach your selected temperature, so please be prepared. You can see the temperature and time settings are displayed on its main screen.
You can also select between Celsius and Fahrenheit. For that, press and hold the thermometer button.
In order to set the temperature, press the thermometer button until the numbers start flashing.
Plus, you can speed up the process by holding down the plus (+) or minus (-) button (s) to jump in increments of 10 degrees.
You can use the timer button for the same functions. When it flashes, set the time by pressing the plus button. You can reach your desired number faster by pressing and holding the button.
Once you hear the beep sounds and the button changes to green, it indicates that you are ready to proceed.

Preheat the Material

Now, select the temperature and time recommended from the Cricut Heat Guide. If you are using a material like cotton, set it as follows: 340°F at 30 seconds.
Keep the garment on a flat, heat-safe surface or Cricut EasyPress mat.
Place the heat press over the area to preheat it before applying heat transfer vinyl (HTV). This helps remove moisture and achieve better adhesion.

Press and Move

Place your design correctly on the chosen material. The design should be aligned correctly and ensure it covers every area, including the edges.
Next, you should apply light pressure and move the press in a circular motion. For larger designs, divide the area into two sections and press each half separately.
Make sure to cool down the design before you start peeling off the backing. The peeling temperature (warm or cool) depends on the type of transfer material you use.
Finally, your project will be complete.