Manny Maker Services

  Want to learn about the process to link your cartridge to the Cricut Explore Air 2 machine? Here is the complete guide you need to follow. But, before you jump to the steps to link cartridges to the Cricut Explore Air 2, here are some precautions you should take.    Check if the Cricut machine is powered on. See whether there are any available firmware updates for your Cricut model. Ensure that the machine is connected to your PC via USB or Bluetooth. Verify that you have signed into your Cricut Design Space account. Now, these are the quick steps you need to follow if you want to link your cartridge to the Cricut Explore Air 2 machine. Make sure to follow all the steps carefully to avoid any mistakes.  Initially, you need to open your Windows or Mac computer and then log in to your Design Space account.  Make sure your machine is powered on and connected to your device. Then launch the Design Space menu at the top and select the Settings icon. Now, move to th...

  Your Cricut Explore Air 2 cutting blades wear out with time if you are cutting the objects frequently. If your blades start to give the unsatisfied or wrong cuts then you should sharpen them using an aluminium foil. Also, when the blades completely wear out then it is time to replace them. If you want to easily change the blade of your machine then keep reading until the end.  Before you learn about the Cricut Explore Air 2 blade changing process below are the quick steps you should keep in mind-  Store the used blades in a secure container or disposal unit. This can save you and others from getting injured. Place the machine on a flat, even surface to prevent slips or falls while changing the blade. Always turn off and unplug your machine before you start. Firmly hold the blade housing while replacing the blade to avoid dropping or slipping. If your blade housing requires a tool to tighten or loosen, use the right tool provided by Cricut or recommended in the manual. N...